Comments on: Using the Linksys SPA-3102 as a VOIP ATA http://blog.weaverling.org/2009/03/12/linksys-spa-3102-voip-ata/ Just what the world needs, yet another blog Sat, 31 Jul 2010 21:43:48 +0000 hourly 1 http://wordpress.org/?v=3.0 By: David Hilton http://blog.weaverling.org/2009/03/12/linksys-spa-3102-voip-ata/comment-page-1/#comment-11140 David Hilton Tue, 19 Jan 2010 02:57:44 +0000 http://blog.weaverling.org/?p=285#comment-11140 A couple of things: First, you can enable an access by dialing ****, 7932#, 1, 1. Second, if you have fiddled around with nat settings on your router (like dd-wrt settings to improve performance with torrents), you may have to enable nat mapping/keepalive. A couple of things:
First, you can enable an access by dialing ****, 7932#, 1, 1.

Second, if you have fiddled around with nat settings on your router (like dd-wrt settings to improve performance with torrents), you may have to enable nat mapping/keepalive.

]]> By: Jared http://blog.weaverling.org/2009/03/12/linksys-spa-3102-voip-ata/comment-page-1/#comment-6983 Jared Mon, 10 Aug 2009 05:28:34 +0000 http://blog.weaverling.org/?p=285#comment-6983 Since I have already purchased a 3102, is there a way to configure it so that it can receive and dial for two different VOIP accounts? Since I have already purchased a 3102, is there a way to configure it so that it can receive and dial for two different VOIP accounts?

]]> By: weave http://blog.weaverling.org/2009/03/12/linksys-spa-3102-voip-ata/comment-page-1/#comment-6428 weave Wed, 22 Jul 2009 20:31:55 +0000 http://blog.weaverling.org/?p=285#comment-6428 Thanks Ryan. I corrected the post. Thanks Ryan. I corrected the post.

]]> By: Ryan http://blog.weaverling.org/2009/03/12/linksys-spa-3102-voip-ata/comment-page-1/#comment-6426 Ryan Wed, 22 Jul 2009 18:52:45 +0000 http://blog.weaverling.org/?p=285#comment-6426 Reboot is: 732668 Reboot is: 732668

]]> By: Setup « Green Underground http://blog.weaverling.org/2009/03/12/linksys-spa-3102-voip-ata/comment-page-1/#comment-6115 Setup « Green Underground Tue, 14 Jul 2009 02:57:02 +0000 http://blog.weaverling.org/?p=285#comment-6115 [...] I took the information from Gizmo5’s SIP adapter page and the documentation off the CD-Rom and set off to get things going.  I chose to put the ATA directly after my cable modem and before the router.  I did this so I would not have to worry about opening ports.  Here is the setup I used: http://blog.weaverling.org/2009/03/12/linksys-spa-3102-voip-ata/ [...] [...] I took the information from Gizmo5’s SIP adapter page and the documentation off the CD-Rom and set off to get things going.  I chose to put the ATA directly after my cable modem and before the router.  I did this so I would not have to worry about opening ports.  Here is the setup I used: http://blog.weaverling.org/2009/03/12/linksys-spa-3102-voip-ata/ [...]

]]> By: D. Glassman http://blog.weaverling.org/2009/03/12/linksys-spa-3102-voip-ata/comment-page-1/#comment-2726 D. Glassman Fri, 17 Apr 2009 05:06:19 +0000 http://blog.weaverling.org/?p=285#comment-2726 Try using a 2 port gatekeeper that supports H.323 and SIP...about 100$ Try using a 2 port gatekeeper that supports H.323 and SIP…about 100$

]]>